《可程式邏輯控制器套用（英文原版）》內容豐富全面，取材適度，並輔以大量實例。各章節之間既有連貫性，又相對具有獨立性，便於讀者根據需要取捨。
基本介紹
- 書名：可程式邏輯控制器套用
- 作者：（英）蘇格蘭學歷管理委員會
- 原版名稱：Applications of Programmable Logic Controllers
- ISBN：9787802214538
- 類別：工具書
- 頁數：127
- 定價：25
- 出版社：中國時代經濟出版社
- 出版時間：2009-09-01
- 裝幀：平裝
- 開本：16開
- 版次：1
基本信息,內容簡介,圖書目錄,
基本信息
叢 書 名： 可程式邏輯控制器套用
出版時間：2009-09-01
版 次：1
頁 數：127
裝 幀：平裝
開 本：16開
內容簡介
《可程式邏輯控制器套用（英文原版）》內容豐富全面，取材適度，並輔以大量實例。各章節之間既有連貫性，又相對具有獨立性，便於讀者根據需要取捨。
圖書目錄
1 Introduction to the unit
1.1 What this unit is about
1.2 0utcomes
1.3 Unit structure
1.4 How to use these learning materials
1.5 Symbols used in this unit
1.6 0ther resources required
1.7 Assessment information
1.1 What this unit is about
1.2 0utcomes
1.3 Unit structure
1.4 How to use these learning materials
1.5 Symbols used in this unit
1.6 0ther resources required
1.7 Assessment information
2 Section 1： Explain and classify PLC hardware
2.1 Introduction to this section
2.2 Assessment information for this section
2.3 Introduction
2.4 The relay
2.5 Hard-wired systems
2.6 The PLC
2.7 Sensors and actuators
2.8 PLC oubsystems
2.9 PLC applications
2.10 Common elements of the PLC
2.11 Basic logic functions
2.12 A short note on contacts
2.13 Example program
2.14 PLC architecture
2.15 PLC failures
2.16 PLC classification
2.17 Program execution
2.18 PLC scan
2.19 Summary of this section
2.1 Introduction to this section
2.2 Assessment information for this section
2.3 Introduction
2.4 The relay
2.5 Hard-wired systems
2.6 The PLC
2.7 Sensors and actuators
2.8 PLC oubsystems
2.9 PLC applications
2.10 Common elements of the PLC
2.11 Basic logic functions
2.12 A short note on contacts
2.13 Example program
2.14 PLC architecture
2.15 PLC failures
2.16 PLC classification
2.17 Program execution
2.18 PLC scan
2.19 Summary of this section
3 Section 2： Describe the operation of PLC software
3.1 Introduction to this section
3.2 Assessment information for this section
3.3 Introduction
3.4 Normally open contact
3.5 Normally closed contact
3.6 Timer
3.7 Counter
3.8 Latch
3.9 Shift registers
3.10 Auxiliary relay （flag）
3.11 Program execution
3.12 Program examples
3.13 Summarv of this section
4 Section 3：Simulating the control of an industrial process using a PLC
5 Answer to SAQs and Activities
6 Glossary
7 Acknowledgements
3.1 Introduction to this section
3.2 Assessment information for this section
3.3 Introduction
3.4 Normally open contact
3.5 Normally closed contact
3.6 Timer
3.7 Counter
3.8 Latch
3.9 Shift registers
3.10 Auxiliary relay （flag）
3.11 Program execution
3.12 Program examples
3.13 Summarv of this section
4 Section 3：Simulating the control of an industrial process using a PLC
5 Answer to SAQs and Activities
6 Glossary
7 Acknowledgements
