付瑞東，男，博士，燕山大學材料科學與工程學院教授。
基本介紹
- 中文名：付瑞東
- 出生日期： 1968-05
- 職業：教師
- 畢業院校：燕山大學
- 學位/學歷：博士
- 專業方向：攪拌摩擦焊接及加工
- 任職院校：燕山大學材料科學與工程學院
個人經歷,研究方向,學術成果,
個人經歷
教育經歷
燕山大學 | 材料學 | 研究她拳龍生教育危和說熱 | 博士
工作經歷
燕腿敬境山大學 | 材料科學與工程學院 | 在崗
研究方向
攪拌摩擦焊接及加工；金屬材料強韌化；先進有色金屬材料
學術成果
論文成果
[1] dili,Sang.付瑞東,Li,Wang,Kang.Interactions between twins and dislocations during dynamic microstructure evolution for hot shear-compression deformation of Fe-38Mn austenitic stee.JOURNAL OF ALLOYS AND COMPOUNDS.2018
[2] 宋建爭.趙子洋,趙鑫,付瑞東,韓樹婆艱腿民.Hydrogen storage properties of MgH2 co-catalyzed by LaH3 and NbH.International Journal of Minerals, Metallurgy and Materials.2017
[3] Jing.付瑞東,Wang,Qiu,Yan.Discontinuous yielding behavior and microstructure evolution during hot deformation of TC11 alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2017
[4] Wang.付瑞東,Jing,Li,Sang.Grain refinement and nanostructure formation in pure copper during cryogenic friction stir processing.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2017
[5] Deng.付瑞東辣迎料糊阿,Jing,Wang.Influence of cold-rolling and annealing treatments on microstructure and mechanical properties of friction stir-welded Al-Cu joints.SCIENCE AND TECHNOLOGY OF WELDING AND JOINING.2016
[6] qinghong,Deng.付瑞東,Wang,Jing.Influence of cold-rolling and annealing treatments on microstructure and mechanical properties of friction stir-welded Al–Cu joints.Science and Technology of Welding and Joining.2016
[7] deli,Sang.付瑞東,Li.Combined deformation behavior and microstructure evolution of 7050 aluminum alloy during hot shear-compression deformation.Materials Characterization.2016
[8] deli,Sang.付瑞東汽戒甩請,Li.The Hot Deformation Activation Energy of 7050 Aluminum Alloy under Three Different Deformation Modes.METALS.2016
[9] yunpeng,Wang.付瑞東,Li,yijun.Enhanced mechanical properties of pure copper with a mixture microstructure of nanocrystalline and ultrafine grains.Materials Letters.2015
[10] 付瑞東.酸性鹽霧下2024鋁合金攪拌摩擦焊接頭的腐蝕行為.中國腐蝕與防護學報.2010
[11] 趙靜梅.高士友,牟明強,付瑞東,李毅軍.銅合金表面攪拌摩擦焊和雷射熔覆製備鎳基合金塗層.中國雷射.2016
[12] 李藝君;付瑞東;.李藝君,付瑞東.鋼攪拌摩擦焊接及加工研究進展.機械工程學報.2015
[13] 李藝君;杜東旭;付瑞東;.李藝君,杜東旭,付瑞東.焊後熱處理對高氮奧氏體不鏽鋼攪拌摩擦焊接頭組織及性能的影響.機械工程學報.2015
[14] Jing.Du,X.,付瑞東,L.,Fu,R.,D.,Li,J.,Shi,Y.,Wang.Physical simulation of microstructural evolution in linear friction welded joints of Ti-6Al-4V alloy.SCIENCE AND TECHNOLOGY OF WELDING AND JOINING.2015
[15] Identifying plastic properties of friction stir-welded material by small punch beam test.PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS.2015
[16] Du.Ji,Ren,Yibin,Yang,Ke,付瑞東,Dongxu,Fu,Ruidong,Li,Yijun,Jing,Lei,Wang.Modification of the Hall-Petch equation for friction-stir-processing microstructures of high-nitrogen steel.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2015
[17] kai,Cheng.Li,Yijun,付瑞東,Kai,Fu,Ruidong,Sang,Deli,Jing,Lei.A novel method to prepare Al-Ga alloy with intergranular penetrating.MATERIALS LETTERS.2014
[18] Dong.Ruidong(2),付瑞東,Chunlin(1),Zhang,Kun(1),Luan,Guohong(1),Meng,Qiang(1),Fu.Effect of natural aging on mechanical properties of 7050 aluminum alloy friction stir welding.Hanjie Xuebao/Transactions of the China Welding Institution.2014
[19] yijun,Li.付瑞東.Microstructures and mechanical properties of friction stir welded joints|of Zr-Ti alloy.Science and Technology of Welding and Joining.2014
[20] Chao,Yuan.Jing,Lei(2),Fu,Ruidong(1),Zhang,Xiangyi(2),付瑞東,Chao(2),Wang,Yunpeng(2),Sang,Deli(2),Li,Yijun(2).Effects of deep cryogenic treatment on the microstructure and mechanical properties of commercial pure zirconium.Journal of Alloys and Compounds.2015
[21] ji,Wang.付瑞東,Ji,Fu,Ruidong,Li,Yijun,Zhang,Jianfeng.Effects of deep cryogenic treatment and low-temperature aging on the|mechanical properties of friction-stir-welded joints of 2024-T351|aluminum alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2014
[22] dongxu,Du.Ren,Yibin,Yang,Ke,付瑞東,Dongxu,Fu,Ruidong,Li,Yijun,Jing,Lei.Gradient characteristics and strength matching in friction stir welded joints of Fe-18Cr-16Mn-2Mo-0.85N austenitic stainless steel.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2014
[23] Chao,Yuan.Fu,Ruidong,Sang,Deli,Yao,Youqiang,Zhang,Xiangyi,付瑞東.The tensile properties and fracture behavior of gradient nano-grained/coarse-grained zirconium.MATERIALS LETTERS.2013
[24] 付瑞東.Fu,Rui-dong,Jian-feng,Li,Yi-jun,Kang,Ju,Liu,Hui-jie,Zhang,Fu-cheng.Effect of welding heat input and post-welding natural aging on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy thin-sheet.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2013
[25] Chao,Yuan.Fu,Ruidong,Fucheng,Zhang,Xiangyi,Liu,Fengchao,付瑞東.Microstructure evolution and mechanical properties of nanocrystalline zirconium processed by surface circulation rolling treatment.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2013
[26] 付瑞東.Structures and Performances of Zr(41)Ti(14)Cu(12.5)Ni(10)Be(22.5) Bulk Amorphous Alloy Treated by Friction Stir Processing.RARE METAL MATERIALS AND ENGINEERING.2011
[27] 付瑞東.Improvement of weld temperature distribution and mechanical properties of 7050 aluminum alloy butt joints.MATERIALS & DESIGN.2011
[28] 康舉.付瑞東.7075-T6鋁合金攪拌摩擦焊焊縫表面帶狀紋理的組織與性能.金屬學報.2010
[29] 付瑞東.Top surface microstructure of friction-stir welded AA2524-T3 aluminum alloy joints.Materials Characterization.2012
[30] 付瑞東.Effect of weld conditions on microstructures and mechanical properties of friction stir welded joints on AZ31B magnesium alloys.Science and Technology of Welding and Joining.2012
[31] 付瑞東.Improvement of formation quality for friction stir welded joints.Welding Journal.2012
[32] 付瑞東.固溶滲氮與鹽浴滲鉻複合處理滲層的組織與性能.金屬熱處理.2008
[33] 付瑞東.Effects of weld thermal cycles and post-welding tempering on second phase particles in 2?25Cr–1Mo–0?25V steels.Science and Technology of Welding and Joining.2008
[34] 付瑞東.7050鋁合金攪拌摩擦焊對接接頭溫度分布和力學性能的改善.materials and design.2011
[35] 付瑞東.攪拌摩擦加工Zr41Ti14Cu12.5Ni10Be22.5大塊非晶的組織和性能.稀有金屬材料與工程.2011
[36] 付瑞東.酸性鹽霧中7075鋁合金攪拌摩擦焊接頭的腐蝕行為.腐蝕科學與防護技術.2009
[37] 付瑞東.Effects of heat treatment processes on microstructure and properties of 2.25Cr-1Mo-0.25V HSLA steels.MATERIALS SCIENCE AND TECHNOLOGY.2009
[38] 欒國紅.付瑞東.中性鹽霧下7075 鋁合金攪拌摩擦焊焊縫的腐蝕行為.中國腐蝕與防護學報.2010
[39] 張景利.付瑞東.2．25Cr一1Mo一0．25V鋼的熱變形行為及其形變組織.塑性工程學報.2010
[40] In-situ investigation on the pitting corrosion behavior of friction stir welded joint.corrosion science.2010
專利
[1]一種具有超高強度高碳合金鋼的製備方法
[2]一種氮強化FeCrCoMnNi高熵合金及其製備方法
[3]一種高強高電導率銅鉻合金的製備方法
[4]一種碳鉻合金的熱加工方法
[5]一種基於第二類組織強化的奧氏體合金及其製備方法
[6]一種製備多尺度多組態雙相鈦合金組織的熱加工方法
[7]一種AI-Cu異質對接薄板的製備方法
[8]一種抑制高強鋁合金攪拌摩擦焊接頭軟化的方法及裝置
[9]一種改善高強鋁合金攪拌摩擦焊接頭性能的熱處理方法
[10]一種細化高錳奧氏體鋼晶粒的熱軋工藝方法
[11]一種細化軋輥表層組織的形變熱處理方法
[12]一種高強鋁合金厚板低熱輸入攪拌摩擦焊方法
[13]一種鋯及鋯合金的強韌化方法
[14]一種鋁鎵合金及其製備方法
[15]一種採用摩擦攪拌方法混合鋁與低熔點金屬的專用攪拌頭
[16]一種具有超細組織的鋁鎵合金的製備方法
[17]一種在金屬材料表面製備具有梯度納米組織結構的方法
科研項目
[1]大型高質量鑄件的材料冶煉與成型控制技術, 2009/01/01-2010/12/31, 完成
[2]鋁鋰合金攪拌摩擦焊接頭腐蝕性能分析, 2011/06/20-2011/08/31, 進行
[3]高強鋁合金攪拌摩擦接頭腐蝕機理研究, 2009/12/01-2010/12/01, 進行
[4]新型加氫反應器用鋼的研製開發, 2009/03/01-2009/12/01, 進行
[5]攪拌摩擦焊搭接接頭界面畸變表征, 2009/09/01-2009/12/01, 進行
[6]多元微合金化軋輥表層組織及耐磨性研究-2, 2008/04/06-2008/08/01, 進行
[7]多元微合金化軋輥表層組織及耐磨性研究-1, 2008/04/06-2008/08/08, 進行
[8]高強鋁合金攪拌摩擦焊接頭腐蝕性能研究, 2008/01/01-2010/01/01, 進行
[9]中油寶世順（河北省）鋼管有限公司質量中心試驗項目, 2010/05/10-2011/05/10, 進行
[10]氮氧化高錳奧氏體鋼攣晶誘發塑性及加工硬化行為的研究, 2004/01/01-2006/12/31, 完成
[11]高碳鉻鋼表面強熱變形加工組織細化及強韌化機理研究, 2018/01/01, 進行
[12]金屬控冷強熱變形加工的組織演變規律及機制, 2017/06/01, 進行
[13]2016國家重點實驗室自主研究經費支持項目（科技廳配套）-自由探索16, 2016/01/01, 進行
[14]2016國家重點實驗室自主研究經費支持項目-自由探索16, 2016/01/01, 進行
[15]高氮鋼攪拌摩擦焊接頭組織特性及調控, 2016/01/01, 進行
[16]2015年度國家重點實驗室基礎研究項目2, 2015/06/09, 進行
[17]鋁鋰合金攪拌摩擦焊接頭海洋環境腐蝕及力學行為研究, 2014/10/30-2015/12/31, 進行
[18]大型鋁合金板拼焊技術及專用設備研製技術開發契約（軋制中心）, 2014/09/23-2014/09/23, 進行
[19]2014年度國家重點實驗室技術研究人才培育課題項目18, 2014/12/17, 進行
[20]7B04鋁合金攪拌摩擦焊接頭力學性能研究, 2013/10/30-2014/12/30, 進行
[21]氮強化高錳奧氏體鋼攪拌摩擦焊接頭組織調控及低溫拉伸性能, 2013/04/26-2016/06/30, 完成
[22]大型薄壁件高效、低應力無變形攪拌摩擦焊接工藝開發, 2012/03/17-2013/03/17, 進行
[23]高強鋁合金攪拌摩擦焊接頭腐蝕機理研究, 2010/05/31, 進行
[24]控冷條件下高強鋁合金攪拌摩擦焊接頭組織及性能研究, 2010/01/01, 進行
[7] deli,Sang.付瑞東,Li.Combined deformation behavior and microstructure evolution of 7050 aluminum alloy during hot shear-compression deformation.Materials Characterization.2016
[8] deli,Sang.付瑞東,Li.The Hot Deformation Activation Energy of 7050 Aluminum Alloy under Three Different Deformation Modes.METALS.2016
[9] yunpeng,Wang.付瑞東,Li,yijun.Enhanced mechanical properties of pure copper with a mixture microstructure of nanocrystalline and ultrafine grains.Materials Letters.2015
[10] 付瑞東.酸性鹽霧下2024鋁合金攪拌摩擦焊接頭的腐蝕行為.中國腐蝕與防護學報.2010
[11] 趙靜梅.高士友,牟明強,付瑞東,李毅軍.銅合金表面攪拌摩擦焊和雷射熔覆製備鎳基合金塗層.中國雷射.2016
[12] 李藝君;付瑞東;.李藝君,付瑞東.鋼攪拌摩擦焊接及加工研究進展.機械工程學報.2015
[13] 李藝君;杜東旭;付瑞東;.李藝君,杜東旭,付瑞東.焊後熱處理對高氮奧氏體不鏽鋼攪拌摩擦焊接頭組織及性能的影響.機械工程學報.2015
[14] Jing.Du,X.,付瑞東,L.,Fu,R.,D.,Li,J.,Shi,Y.,Wang.Physical simulation of microstructural evolution in linear friction welded joints of Ti-6Al-4V alloy.SCIENCE AND TECHNOLOGY OF WELDING AND JOINING.2015
[15] Identifying plastic properties of friction stir-welded material by small punch beam test.PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS.2015
[16] Du.Ji,Ren,Yibin,Yang,Ke,付瑞東,Dongxu,Fu,Ruidong,Li,Yijun,Jing,Lei,Wang.Modification of the Hall-Petch equation for friction-stir-processing microstructures of high-nitrogen steel.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2015
[17] kai,Cheng.Li,Yijun,付瑞東,Kai,Fu,Ruidong,Sang,Deli,Jing,Lei.A novel method to prepare Al-Ga alloy with intergranular penetrating.MATERIALS LETTERS.2014
[18] Dong.Ruidong(2),付瑞東,Chunlin(1),Zhang,Kun(1),Luan,Guohong(1),Meng,Qiang(1),Fu.Effect of natural aging on mechanical properties of 7050 aluminum alloy friction stir welding.Hanjie Xuebao/Transactions of the China Welding Institution.2014
[19] yijun,Li.付瑞東.Microstructures and mechanical properties of friction stir welded joints|of Zr-Ti alloy.Science and Technology of Welding and Joining.2014
[20] Chao,Yuan.Jing,Lei(2),Fu,Ruidong(1),Zhang,Xiangyi(2),付瑞東,Chao(2),Wang,Yunpeng(2),Sang,Deli(2),Li,Yijun(2).Effects of deep cryogenic treatment on the microstructure and mechanical properties of commercial pure zirconium.Journal of Alloys and Compounds.2015
[21] ji,Wang.付瑞東,Ji,Fu,Ruidong,Li,Yijun,Zhang,Jianfeng.Effects of deep cryogenic treatment and low-temperature aging on the|mechanical properties of friction-stir-welded joints of 2024-T351|aluminum alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2014
[22] dongxu,Du.Ren,Yibin,Yang,Ke,付瑞東,Dongxu,Fu,Ruidong,Li,Yijun,Jing,Lei.Gradient characteristics and strength matching in friction stir welded joints of Fe-18Cr-16Mn-2Mo-0.85N austenitic stainless steel.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2014
[23] Chao,Yuan.Fu,Ruidong,Sang,Deli,Yao,Youqiang,Zhang,Xiangyi,付瑞東.The tensile properties and fracture behavior of gradient nano-grained/coarse-grained zirconium.MATERIALS LETTERS.2013
[24] 付瑞東.Fu,Rui-dong,Jian-feng,Li,Yi-jun,Kang,Ju,Liu,Hui-jie,Zhang,Fu-cheng.Effect of welding heat input and post-welding natural aging on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy thin-sheet.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2013
[25] Chao,Yuan.Fu,Ruidong,Fucheng,Zhang,Xiangyi,Liu,Fengchao,付瑞東.Microstructure evolution and mechanical properties of nanocrystalline zirconium processed by surface circulation rolling treatment.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2013
[26] 付瑞東.Structures and Performances of Zr(41)Ti(14)Cu(12.5)Ni(10)Be(22.5) Bulk Amorphous Alloy Treated by Friction Stir Processing.RARE METAL MATERIALS AND ENGINEERING.2011
[27] 付瑞東.Improvement of weld temperature distribution and mechanical properties of 7050 aluminum alloy butt joints.MATERIALS & DESIGN.2011
[28] 康舉.付瑞東.7075-T6鋁合金攪拌摩擦焊焊縫表面帶狀紋理的組織與性能.金屬學報.2010
[29] 付瑞東.Top surface microstructure of friction-stir welded AA2524-T3 aluminum alloy joints.Materials Characterization.2012
[30] 付瑞東.Effect of weld conditions on microstructures and mechanical properties of friction stir welded joints on AZ31B magnesium alloys.Science and Technology of Welding and Joining.2012
[31] 付瑞東.Improvement of formation quality for friction stir welded joints.Welding Journal.2012
[32] 付瑞東.固溶滲氮與鹽浴滲鉻複合處理滲層的組織與性能.金屬熱處理.2008
[33] 付瑞東.Effects of weld thermal cycles and post-welding tempering on second phase particles in 2?25Cr–1Mo–0?25V steels.Science and Technology of Welding and Joining.2008
[34] 付瑞東.7050鋁合金攪拌摩擦焊對接接頭溫度分布和力學性能的改善.materials and design.2011
[35] 付瑞東.攪拌摩擦加工Zr41Ti14Cu12.5Ni10Be22.5大塊非晶的組織和性能.稀有金屬材料與工程.2011
[36] 付瑞東.酸性鹽霧中7075鋁合金攪拌摩擦焊接頭的腐蝕行為.腐蝕科學與防護技術.2009
[37] 付瑞東.Effects of heat treatment processes on microstructure and properties of 2.25Cr-1Mo-0.25V HSLA steels.MATERIALS SCIENCE AND TECHNOLOGY.2009
[38] 欒國紅.付瑞東.中性鹽霧下7075 鋁合金攪拌摩擦焊焊縫的腐蝕行為.中國腐蝕與防護學報.2010
[39] 張景利.付瑞東.2．25Cr一1Mo一0．25V鋼的熱變形行為及其形變組織.塑性工程學報.2010
[40] In-situ investigation on the pitting corrosion behavior of friction stir welded joint.corrosion science.2010
專利
[1]一種具有超高強度高碳合金鋼的製備方法
[2]一種氮強化FeCrCoMnNi高熵合金及其製備方法
[3]一種高強高電導率銅鉻合金的製備方法
[4]一種碳鉻合金的熱加工方法
[5]一種基於第二類組織強化的奧氏體合金及其製備方法
[6]一種製備多尺度多組態雙相鈦合金組織的熱加工方法
[7]一種AI-Cu異質對接薄板的製備方法
[8]一種抑制高強鋁合金攪拌摩擦焊接頭軟化的方法及裝置
[9]一種改善高強鋁合金攪拌摩擦焊接頭性能的熱處理方法
[10]一種細化高錳奧氏體鋼晶粒的熱軋工藝方法
[11]一種細化軋輥表層組織的形變熱處理方法
[12]一種高強鋁合金厚板低熱輸入攪拌摩擦焊方法
[13]一種鋯及鋯合金的強韌化方法
[14]一種鋁鎵合金及其製備方法
[15]一種採用摩擦攪拌方法混合鋁與低熔點金屬的專用攪拌頭
[16]一種具有超細組織的鋁鎵合金的製備方法
[17]一種在金屬材料表面製備具有梯度納米組織結構的方法
科研項目
[1]大型高質量鑄件的材料冶煉與成型控制技術, 2009/01/01-2010/12/31, 完成
[2]鋁鋰合金攪拌摩擦焊接頭腐蝕性能分析, 2011/06/20-2011/08/31, 進行
[3]高強鋁合金攪拌摩擦接頭腐蝕機理研究, 2009/12/01-2010/12/01, 進行
[4]新型加氫反應器用鋼的研製開發, 2009/03/01-2009/12/01, 進行
[5]攪拌摩擦焊搭接接頭界面畸變表征, 2009/09/01-2009/12/01, 進行
[6]多元微合金化軋輥表層組織及耐磨性研究-2, 2008/04/06-2008/08/01, 進行
[7]多元微合金化軋輥表層組織及耐磨性研究-1, 2008/04/06-2008/08/08, 進行
[8]高強鋁合金攪拌摩擦焊接頭腐蝕性能研究, 2008/01/01-2010/01/01, 進行
[9]中油寶世順（河北省）鋼管有限公司質量中心試驗項目, 2010/05/10-2011/05/10, 進行
[10]氮氧化高錳奧氏體鋼攣晶誘發塑性及加工硬化行為的研究, 2004/01/01-2006/12/31, 完成
[11]高碳鉻鋼表面強熱變形加工組織細化及強韌化機理研究, 2018/01/01, 進行
[12]金屬控冷強熱變形加工的組織演變規律及機制, 2017/06/01, 進行
[13]2016國家重點實驗室自主研究經費支持項目（科技廳配套）-自由探索16, 2016/01/01, 進行
[14]2016國家重點實驗室自主研究經費支持項目-自由探索16, 2016/01/01, 進行
[15]高氮鋼攪拌摩擦焊接頭組織特性及調控, 2016/01/01, 進行
[16]2015年度國家重點實驗室基礎研究項目2, 2015/06/09, 進行
[17]鋁鋰合金攪拌摩擦焊接頭海洋環境腐蝕及力學行為研究, 2014/10/30-2015/12/31, 進行
[18]大型鋁合金板拼焊技術及專用設備研製技術開發契約（軋制中心）, 2014/09/23-2014/09/23, 進行
[19]2014年度國家重點實驗室技術研究人才培育課題項目18, 2014/12/17, 進行
[20]7B04鋁合金攪拌摩擦焊接頭力學性能研究, 2013/10/30-2014/12/30, 進行
[21]氮強化高錳奧氏體鋼攪拌摩擦焊接頭組織調控及低溫拉伸性能, 2013/04/26-2016/06/30, 完成
[22]大型薄壁件高效、低應力無變形攪拌摩擦焊接工藝開發, 2012/03/17-2013/03/17, 進行
[23]高強鋁合金攪拌摩擦焊接頭腐蝕機理研究, 2010/05/31, 進行
[24]控冷條件下高強鋁合金攪拌摩擦焊接頭組織及性能研究, 2010/01/01, 進行
