王雲沖，男，博士，浙江大學電氣工程學院副教授、碩士生導師。
基本介紹
- 中文名：王雲沖
- 畢業院校：香港理工大學
- 學位/學歷：博士
- 職業：教師
- 專業方向：永磁電機設計、高速電機設計與控制技術
- 任職院校：浙江大學電氣工程學院
個人經歷,學習經歷,工作經歷,研究方向,主講課程,研究與成果,學術論文,科研項目,
個人經歷
學習經歷
2006年9月－2010年6月，浙江省杭州市，浙江大學，電氣工程及其自動化，本科
2010年9月－2013年3月，浙江省杭州市，浙江大學，電機與電器，碩士
2014年9月－2017年10月，香港，香港理工大學，電氣工程，博士
工作經歷
2013年4月-2014年8月，北京，北京ABB電氣傳動有限公司，研發工程師
2017年11月-今，浙江省杭州市，浙江大學，電氣工程學院，講師研究與成果
研究方向
永磁電機設計
高速電機設計與控制技術
主講課程
智慧型控制技術及套用
研究與成果
學術論文
Y. C. Wang, S. Niu* and W. N. Fu, “An Electrical-Continuously Variable Transmission System Based on Doubly-Fed Flux-Bidirectional Modulation,” IEEE Transactions on Industrial Electronics, 2017.
Y. C. Wang, S. Niu and W. N. Fu, “Sensitivity Analysis and Optimal Design of a Dual Mechanical Port Bidirectional Flux-Modulated Machine,” IEEE Transactions on Industrial Electronics, 2018.
Y. C. Wang, W. N. Fu* and S. Niu, “A Novel Structure of Dual-stator Hybrid Excitation Synchronous Motor,” IEEE Transactions on Applied Superconductivity, 2016.
Y. C. Wang, S. Niu*, W.N. Fu, S.L. Ho, “Design and Optimization of Electric Continuous Variable Transmission System for Wind Power Generation”, IEEE Trans on magnetics, 2016.
Y. C. Wang, S. Niu* and W. N. Fu, “Electromagnetic Performance Analysis of Novel PM Flux-Regulatable PM Machines for Wide Constant-Power Speed Range Operation” Energies, 2015.
Y. C. Wang, S. L. Ho, W.N. Fu* and Jianxin, Shen, “A Novel Brushless Doubly Fed Generator for Wind Power Generation”, IEEE Trans on magnetics, 2012.
Y. C. Wang, S. L. Ho, W.N. Fu* and Jianxin, Shen, “A Novel Rotor Position Detection Method for Sensorless Control of Magnetic-Geared Permanent-Magnet Brushless Motor” IEEE Trans on magnetics, 2013.
Y. C. Wang, S Niu*, W.N. Fu and S.L .Ho “A Novel Dual Rotor Flux-Bidirectional-Modulation Machine for Hybrid Electrical Vehicles” Vehicle Power and Propulsion Conference (VPPC), 2016 IEEE
Y. C. Wang, S Niu*, W.N. Fu and X. J. Li“A Novel Stator and Rotor Dual PM Flux Modulated Machine”Chinese Journal of Electrical Engineering, 2017
11. Y. C. Wang, S Niu*, W.N. Fu and X. J. Li “A Novel Axial Flux Stator and Rotor Dual Permanent Magnet Machine”, CES Transactions on Electrical Machines and Systems, 2017
Y. C. Wang, D. Shi, J. X. Shen*, K. Wang, and M. J. Jin “Design and Fabrication of a Linear Generator forVibration Energy Harvesting” IEEE ICSET 2010, Kandy, Sri Lanka.
J Shen, C Wang, D Miao, M Jin, D Shi, Y Wang “Analysis and optimization of a modular stator core with segmental teeth and solid back iron for pm electric machines” Electric Machines & Drives Conference (IEMDC), 2011 IEEE International
X Guo, S Wu, W Fu, Y Liu, Y Wang, P Zeng “Control of a Dual-Stator Flux-Modulated Motor for Electric Vehicles” Energies
K. Wang, J. X. Shen, Y. C. Wang, M. J. Jin, D. Shi and Bin. Xia “Modeling and verification of a thermoelectric energy scavenger” IEEE ICSET 2010, Kandy, Sri Lanka
Zhu, Li, Li Zhu,Shuangxia Niu,Y. C. Wang,Chengmin Wang. "Advanced Design and Operation Consideration for Close-Connected Winding Permanent-Magnet Brushless DC Machine."IEEE Transactions on Applied Superconductivity (2016)
科研項目
1. 主持 面向飛輪儲能系統的高速同步磁阻電機研究，（浙江大學青年科研創新專項）；
2. 主持 ZJU-QTI Future Mobility Lab浙大-美國高通未來交通技術實驗室（海外橫向）；
