復現性測量條件(reproducibility condition of measurement)是2015年公布的計量學名詞。
基本介紹
- 中文名:復現性測量條件
- 外文名:reproducibility condition of measurement
- 所屬學科:計量學
- 公布時間:2015年
復現性測量條件(reproducibility condition of measurement)是2015年公布的計量學名詞。
復現性測量條件(reproducibility condition of measurement)是2015年公布的計量學名詞。定義不同地點、不同操作者、不同測量系統,對同一或相類似被測對象重複測量的一組測量條件。出處《...
測量復現性是在不同測量條件下,如不同的方法,不同的觀測者,在不同的檢測環境對同一被檢測的量進行檢測時,其測量結果一致的程度。測量復現性必將成為儀表的重要性能指標。 測量的精確性不僅僅是儀表的精確度,它還包括各種因素對測量參數的影響,是綜合誤差。 這說明0.25級電動Ⅲ變送器測量精度由於溫度和...
廣義上,再現性:在改變了的測量條件下,對同一被測量的測量結果之間的一致性,稱為測量結果的再現性。再現性又稱為復現性、重現性。定義 在計算機科學中,再現性是指只要程式執行時的環境和初始條件相同,當程式重複執行時,不論它是從頭到尾不停頓地執行,還是“停停走走”地執行,都將獲得相同的結果。再現性是...
[測量]復現性 [測量]復現性是2015年全國科學技術名詞審定委員會公布的計量學名詞。定義 在復現性測量條件下的測量精密度。公布時間 2015年,經全國科學技術名詞審定委員會審定發布。出處 《計量學名詞》。
repeatability [ofresults of measurement])是2020年公布的電力名詞。定義 在一組重複性測量條件下,對同一或類似被測對象重複測量所得示值或測得值間的一致程式。重複性測量條件指:同樣測量步驟、同一觀測者、在同樣的條件下使用同一測量儀表、在同一實驗室(場地)、時間間隔比較短。出處 《電力名詞》 (第三版)
因為在重複測量條件下的精密度,可以用測量結果的重復性(見5.6條)來定量表示;而在復現測量條件下的精密度,則用測量結果的復現性(見5.7條)來定量表示。例如:可以說“測量結果的重複性為2mg”或“重複性標準〔偏〕差為2mg”,而不宜說“精密度為2mg”。國際標準 由於精密度(我國常常又簡稱為“精度”)...
在規定條件下,對同一或類似被測對象重複測量所得示值或測得值之間的一致程度[VIM,2.15]。注1: 測量精密度通常用不精密程度以數字形式表示,如在規定測量條件下的標準偏差、方差或變差係數。注2: “規定條件”可以是諸如重複性測量條件、期間精密度測量條件或復現性測量條件。注 3:測量精密度用於定義測量重...
[測量結果的]復現性 [測量結果的]復現性(reproducibility [of results of measurement])是2005年公布的航天科學技術名詞。公布時間 2005年經全國科學技術名詞審定委員會審定發布。出處 《航天科學技術名詞》第一版。
只有把測量看成是“過程”,才能把問題控制在最開始到最終的全過程中,才能從一開始到最終測量結果的全過程都加以控制從而產生最佳結果。“測量過程”的概念是把測量當作一個完整的過程看待,這一過程從分析測量的依據、測量設備的溯源性和校準開始,通過必要的驗證和計量人員保證,符合要求的工作場所和工作條件等,才能...
(1)這些條件稱為重復性條件。(2)重複性條件包括:相同的測量程式,相同的觀測者,在相同條件下使用相同的測量儀器在短時間內重複測量。(3)重複性可以用測量結果的分散性定量的表示。(10)[測量結果的]再現性:再現性又稱復現性。再現性:在改變了測量條件下,同一被測量的測量結果之間的一致性。(1)...
GRR指“測量系統的重復性和復現性”,英文是“Gauge Repeatability and Reproducibility ”,表示測量的重複性(Repeatability)與再生性(Reproducibility)可以圖表方式說明如下:重複性(Repeatability),在其取得數據時應符合下列條件:◆同一人員 ◆相同的歸零條件 ◆同一產品 ◆同一位置 ◆同樣的環境條件 ◆數據要在...
(5)重複性測量儀器的重復性在相同測量條件下,重複測量同一個被測量,測量儀器提供相近示值的能力。測量結果的重複性在相同測量條件下,對同一被測量進行連續多次測量所得結果之間的一致性。(6)復現性在改變了測量條件下,同一被測量的測量結果的一致性。(7)穩定性測量儀器保持其計量特性隨時間恆定的能力。(8)...
1、 測量精密度通常用不精密程度以數字形式表示,如在規定測量條件下的標準差、方差或變異係數。2、 規定條件可以是重複性測量條件、期間精密度測量條件或復現性測量條件。3、 測量精密度用於定義測量重複性、期間測量精密度或測量復現性。4、 術語“測量精密度”有時用於表示“測量準確度”,這是錯誤的。測量不...
復現性 測量復現性是在不同測量條件下,如不同的方法,不同的觀測者,在不同的檢測環境對同一被檢測的量進行檢測時,其測量結果一致的程度。測量復現性必將成為儀表的重要性能指標。測量的精確性不僅僅是儀表的精確度,它還包括各種因素對測量參數的影響,是綜合誤差。穩定性 在規定工作條件內,儀表某些性能隨時間...
說明:(1) 這些條件稱為重復性條件;(2) 重複性條件包括相同的測量程式,相同的觀測者,在相同的條件下使用相同的測量儀器, 在相同的地點,以及在短時間內重複測量;(3) 重複性可以用測量結果的分散性定量地表示。[測量結果的]復現性:在改變了的測量條件下,同一被測量的測量結果之間的一致性。說明:(1)...
在相同測量條件下,對同一個被測量進行連續多次測量所得結果之間的一致性。註:⑴這些條件稱為重復性條件。⑵重複性條件包括:相同的測量程式、相同的觀測者、在相同的條件下使用相同的測量儀器、相同地點、在短時間內重複測量。⑶重複性可以用測量結果的分散性定量地表示。(JJF)〔測量結果的〕復現性 在改變了...
(a為顯著性水平 )與方差 分別為: 那么,被測量 y所對應的包含因子k 為 k= / 根據大量的資料和經驗可以得到下列結論:重復性條件或復現性條件下的多次測量結果可按常態分配估計;如果某被測量或儀器儀表的示值分布不能判別時,可按均勻分布估計;被測量的上限和下限已知,並且靠近中心值附近的機率密度較大...